Toro STX26

वैट के बिना मूल्य

13,30,708 आई एन आर

15,950 USD

बुनियादी सूचना
उत्पाद समूह	स्टंप ग्राइन्डर
ब्राण्ड /मॉडल	Toro STX26


निर्माण का वर्ष	2019
मशीन की स्थिति	Fontana, California
देश	अमेरिका
मेस्कस आई डी	066D46E1
+ अधिक विवरण दिखाएँ
कीमत
मुद्रा का चयन करें
वैट के बिना मूल्य	13,30,708 आई एन आर (15,950 USD)
वैट
वैट सहित मूल्य	-
विवरण
आन्तरिक स्टॉक नम्बर	2023034
क्षतिग्रस्त	Operates As Intended
सामान्य ग्रेड (अधिक से अधिक5 -कम से कम1 )	1 2 3 4 5
अन्य सूचना	2019 - Toro STX-26 Walk Behind Stump Grinder, Gas Engine, Intelli-Sweep System, Rubber Tracks, Hydraulic Driven Cutting Wheel, 19" Cutting Wheet with 12 Teeth, 12.5" Cutting Depth, Low 362 Hours, Excellent Condition! Note: Inbound Unit! More Photos and Video Coming Soon! Track Design • Allows for zero turn capability • Provides a low center of gravity and large footprint • Increased stability on side hills • Eliminates tire ruts and flat tires • Operates in wet & soft ground conditions. Full Hydraulic Operation • Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches • No need to replace expensive cogged pulleys • No worry of customers engaging grinder head at full throttle • Eliminate shock loads to the engine by belts slipping or head stopping Traction Controls Easy-to-use control system offers smooth operation and fewer lever & nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions. 1) Left and right traction control (forward, reverse, turn) 2) Sweep, lift & lower and engagement of grinder head. Offset Cutting Head • Provides operator with excellent visibility to stump • Allows full rotation perpendicular to machine Custom Trailer Easy to load on any trailer, including Toro's custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires. Specifications Cutting Depth: 12.5" below grade Cutting Wheel: 19" diameter to tooth; 0.75" thick, 12 green teeth Cutting Height: 35" above grade Head Swing: 47" Arc Hydraulic Flow: 13.5 gpm hydraulic flow to head Engine: Kawasaki 730V Twin Cylinder Dimensions: 34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H Weight: 1200 lbs. (545 kg) 34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H

ReQuip Corporation

+1 9...दिखाएँ
जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें

Send e-mail

विक्रेता का आखिरी /पहला नाम

REQUIP ASSETS
ReQuip Corporation
- +1 9...दिखाएँ
  जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें
- 16516 Washington Dr, Fontana CA 92335, अमेरिका