पी ओ ए
Teknamotor Skorpion 250R/90

बुनियादी सूचना

उत्पाद समूहलकड़ी फाड़नेवाला और कटर
ब्राण्ड /मॉडलTeknamotor Skorpion 250R/90
निर्माण का वर्ष2024
Extra optionsNew/unused
देश
मेस्कस आई डी7CDA1EFC
+ अधिक विवरण दिखाएँ

कीमत

वैट के बिना मूल्यपी ओ ए

विवरण

सामान्य ग्रेड (अधिक से अधिक5 -कम से कम1 )
परिवहन का वजन1,150 किलोग्राम
पूरी सेवा का इतिहासहाँ
Production countryपोलैंड
अनुलग्नकSkorpion 250 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 250 mm.

Overall dimensions (LxWxH) 2830 x 2400 x 2680 [A] / 1800 x 2100 x 2600 [B] [mm]
Weight 1450 [A] / 1150 [B] [kg]
Branch diameter 250 [mm]
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to 42 [running meters/min]
Chipping capacity up to 18 [stère meters/h]
Chip width from 9 to 14 [mm]
Feeding unit hydraulic feeder
Disk diameter 800 [mm]
Hopper dimensions (WxH) 420x255 [mm]
Min. power of tractor 80 [hp]

()* - dimension after the pipe is raised, during operation

Equipment included:
- Swivelled by360° ejection tube with deflector.
- PTO shaft.
- Own hydraulic system.
- Electronic system of work control with hour meter.
- Feeding table with a chain feeder.

Additional accessories on request:
- Extension of the ejection tube.
अन्य सूचनाSkorpion 250 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 250 mm. Skorpion 250R/90 is a disc model with a pneumatic blow-out system on the disc. Chips are ejected through the rotating chimney which can turn by 360 degrees in relation to the chassis. The cutting system consists of a disc with cutting knives sharpened on either side.

This chipper is mounted on a single-axial chassis, adapted to tow it in the forest and field roads. There is also a version with a three-point system of linkage to the tractor (without single-axial chassis).

The chipper is designed to work with an over 80 hp farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 or 1000 revolutions per minute.

The essential equipment of the chipper includes a hydraulic propulsion system that drives the feeding rollers and is driven by its own hydraulic pump.

Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position.

Skorpion 250 R/90 is equipped with one of the most modern electronic No-stress systems available on the European market; the system automatically prevents overloading of the drive system by temporarily stopping the feeding. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter.

The chipper is also additionally equipped with an electronic system of work control, protecting the machine against excessive duty through temporary stopping the feeding.

Overall dimensions (LxWxH) 2830x2400x2680 [A] // 1800x2100x2600 [B] [mm]
Weight 1450[A] / 1150[B] [kg]
Branch diameter 250 [mm]
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to 42 [running meters/min]
Chipping capacity up to 18 [stère meters/h]
Chip width from 9 to 14 [mm]
Feeding unit hydraulic feeder
Disk diameter 800 [mm]
Hopper dimensions (WxH) 420x255 [mm]
Min. power of tractor 80 [hp]

Equipment included:
-PTO shaft
-Independent hydraulic system
-Adjustment of height of ejecting the chips
-Rotary chimney 360°
-No-stress system

Additional accessories on request:
-Extension of the ejection tube
Teknamotor Sp. z o.o.
  • +48 ...दिखाएँ
    जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें
Send e-mail

विक्रेता का आखिरी /पहला नाम

  • TOMASZ SZCZEPANIAK

    Teknamotor Sp. z o.o.
    • +48 ...दिखाएँ
      जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें
    • +48 ...दिखाएँ
      जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें
    • +48 ...दिखाएँ
      जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें
    • भाषा: जर्मन, अंग्रेज, पोलिश, रूसी, यूक्रेनियाई
    • ul. Świętokrzyska 2a, 27-400 Ostrowiec Świętokrzyski, पोलैंड

कम्पनी

TEKNAMOTOR SP. Z O.O.

14
MASCUS पर सक्रिय वर्ष
सभी विज्ञापन
Report suspicious display
संबंधित ब्राण्ड
ब्राण्डविज्ञापन की संख्या
John Deere1057
Timberjack481
Ponsse452
Valmet407
Caterpillar346

विवरण - सामान्य ग्रेड (अधिक से अधिक5 -कम से कम1 ): 5, परिवहन का वजन: 1,150 किलोग्राम, पूरी सेवा का इतिहास: हाँ, Production country: पोलैंड