Teknamotor Skorpion 160 R/90 Holzhäcksler Häcksler Chipper

पी ओ ए
पी ओ ए
Teknamotor Skorpion 160 R/90 Holzhäcksler Häcksler Chipper
Teknamotor Skorpion 160 R/90 Holzhäcksler Häcksler Chipper का वीडियो

बुनियादी सूचना

उत्पाद समूहलकड़ी चिपर्स
ब्राण्ड /मॉडलTeknamotor Skorpion 160 R/90 Holzhäcksler Häcksler Chipper
निर्माण का वर्ष2024
Extra optionsNew/unused
देश
मेस्कस आई डी6895F510
+ अधिक विवरण दिखाएँ

कीमत

वैट के बिना मूल्यपी ओ ए

विवरण

पूरी सेवा का इतिहासहाँ
सामान्य ग्रेड (अधिक से अधिक5 -कम से कम1 )
परिवहन का वजन850 किलोग्राम
परिवहन आयाम(LxWxH)1450x1890x2150
एम एम
अनुलग्नकSkorpion 160 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 160 mm.

Weight 850 [kg]
Branch diameter 160 [mm]
No of knives 2 cutting + 2 counter-knife
Feeding speed up to 33 [running meters/min]
Chipping capacity up to 12 [stère meters/h]
Chip width from 9 to 11 [mm]
Feeding unit hydraulic feeder
Disk diameter 550 [mm]
Hopper dimensions (WxH) 285 x 165 [mm]
Type of drive tractor’s PTO
Min. power of tractor 80 [hp]

()* - dimension after erection of the pipe, during operation

Equipment included:
-PTO shaft
-Independent hydraulic system
-Adjustment of height of ejecting the chips
-Rotary chimney 360°
-No-stress system

Additional accessories on request:
-Extension of the ejection tube
अन्य सूचनाSkorpion 160 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 160 mm.

Skorpion 160 R/90 is a disc model with a pneumatic blow-out system on the disc. Chips are ejected through the rotating chimney which can turn by 360 degrees in relation to the chassis. The cutting system consists of a disc with cutting knives sharpened on either side.

The chipper has a three-point suspension system and is designed to work with an above 80 hp farm tractor. Innovative solution of the lateral position of the inlet hopper enables simultaneous transport of chipper and trailer with a tractor.

The essential equipment of the chipper includes a hydraulic propulsion system servicing the feeding rollers driven by its own hydraulic pump. There is also a possibility of equipping the chipper with a unit for receiving the hydraulics from the tractor. Standard models also have a lever system of the hydraulic divider that can change the direction of the feeding rollers.

The chipper is also additionally equipped with an electronic system of work control, protecting the machine against excessive duty through temporary stopping the feeding.

Overall dimensions (LxWxH) 1450 x 1890 (2390)* x 2150 (2450)* [mm]
Weight 850 [kg]
Branch diameter 160 [mm]
No of knives 2 cutting + 2 counter-knife
Feeding speed up to 33 [running meters/min]
Chipping capacity up to 12 [stère meters/h]
Chip width from 9 to 11 [mm]
Feeding unit hydraulic feeder
Disk diameter 550 [mm]
Hopper dimensions (WxH) 285 x 165 [mm]
Type of drive tractor’s PTO
Min. power of tractor 80 [hp]

()* - dimension after erection of the pipe, during operation

Equipment included:
-PTO shaft
-Independent hydraulic system
-Adjustment of height of ejecting the chips
-Rotary chimney 360°
-No-stress system

Additional accessories on request:
-Extension of the ejection tube
Teknamotor Sp. z o.o.
  • +48 ...दिखाएँ
    जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें
Send e-mail

विक्रेता का आखिरी /पहला नाम

  • TOMASZ SZCZEPANIAK

    Teknamotor Sp. z o.o.
    • +48 ...दिखाएँ
      जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें
    • +48 ...दिखाएँ
      जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें
    • +48 ...दिखाएँ
      जब आप विक्रेता से सम्पर्क करें तो कृपया मेस्कस का जिक्र करें
    • भाषा: जर्मन, अंग्रेज, पोलिश, रूसी, यूक्रेनियाई
    • ul. Świętokrzyska 2a, 27-400 Ostrowiec Świętokrzyski, पोलैंड

कम्पनी

TEKNAMOTOR SP. Z O.O.

14
MASCUS पर सक्रिय वर्ष
सभी विज्ञापन
Report suspicious display
संबंधित ब्राण्ड
ब्राण्डविज्ञापन की संख्या
John Deere1057
Timberjack481
Ponsse452
Valmet407
Caterpillar346

विवरण - पूरी सेवा का इतिहास: हाँ, सामान्य ग्रेड (अधिक से अधिक5 -कम से कम1 ): 5, परिवहन का वजन: 850 किलोग्राम, परिवहन आयाम(LxWxH): 1450x1890x2150 एम एम